• 0203 5140 0364
  • 0781 7468 815
  • GET YOUR QUOTE ONLINE

Your free online estimate

 

Please Select a product category from the list
Now Select the product you're interested in...
Now Select the product thickness
Now Select the product surface finish

Worktop Styles & Measurements

Straight
L-shape / Gallery
U-shape & Island
U-shape
L-shape & Island
Custom
Piece A
mm
X
mm
Add Another

Edge Finish

Click the edge finish you require above and input the total length needed. (mm)
mm

Round Corners

Small Round Corner Radius

Small Round Corner Radius

These are the cut-outs for under mounted sinks etc, that require the inner exposed edges to be polished because they will be visible.

Large Round Corner Radius

Large Round Corner Radius

These are the cut-outs for under mounted sinks etc, that require the inner exposed edges to be polished because they will be visible.

Splashbacks

Splashbacks

This is the panel which can be used behind the hob, range and sink to protect the wall from splashes. You can also have full height splashbacks which are positioned on top of the work surface to the underside of the wall units.

Measure the length (mm) and height (mm) of each splashback piece that you require and input them into the boxes.

Piece A
mm
X
mm
Add Splashback

Upstands

Upstands

The upstands can be used instead of tiling the walls.

Measure the height and the total length of upstands required. Quote based on 20mm thick material.

If upstands are different in height, you can add additional fields to enter the correct dimensions.

Piece A
mm
X
mm
Add Upstand

Windowsills

Windowsill

The windowsill is used to substitute the existing wooden or plastic windowsill to compliment your all-new kitchen.

Measure the length and width of your windowsill(s) individually, then enter your dimensions into the fields in mm.

The windowsill is made out of the same material thickness as your worktops.

Piece A
mm
X
mm
Add Windowsill

Sink Cut Out

Over Mount Sink Cut Out

Over Mount Sink Cut Out

These are the cut-outs with an unfinished inner edge which will not be visible, i.e. for the surface mounted sinks etc.

Flush Mount Sink Cut Out

Flush Mount Sink Cut Out

These are the cut-outs with an unfinished inner edge that will not be visible and a small recess for the lip of the sink to be positioned flush with the rest of the surface.

Under Mount Sink Cut Out

Under Mount Sink Cut Out

These are the cut-outs for under mounted sinks etc, that require the inner exposed edges to be polished because they will be visible.

Under Mount Raised Sink Cut Out

Under Mount Raised Sink Cut Out

These are the cut-outs for under mounted sinks etc, that require the inner exposed edges to be polished because they will be visible.

Drainer

Undermount Sink with Draining Groves

Draining Grooves

These are the cut-outs for under mounted sinks etc, that require the inner exposed edges to be polished because they will be visible.

Undermount Sink with Recessed Drainer

Drainer Recess

These are the cut-outs for under mounted sinks etc, that require the inner exposed edges to be polished because they will be visible.

Hob & Other Cut Outs

Hob Cut Out

Drop In Hob Cut Out

These are the cut-outs for under mounted sinks etc, that require the inner exposed edges to be polished because they will be visible.

Flush Fit Hob Cut Out

Flush Fit Hob Cut Out

These are the cut-outs for under mounted sinks etc, that require the inner exposed edges to be polished because they will be visible.

Downdraft Cut Out

Downdraft Extractor Cut Out

These are the cut-outs for under mounted sinks etc, that require the inner exposed edges to be polished because they will be visible.

Unpolished Cut Out

Unpolished Cut Out

These are the cut-outs for under mounted sinks etc, that require the inner exposed edges to be polished because they will be visible.

Tap Holes, Switch/Socket Cut Out

Tap Holes

Tab & Other Holes

These are the cut-outs for under mounted sinks etc, that require the inner exposed edges to be polished because they will be visible.

Wall Sockets, Pop-Up Sockets and Switches

Socket & Switch Cut Outs

These are the cut-outs for under mounted sinks etc, that require the inner exposed edges to be polished because they will be visible.

Please note this is an Estimate only.
We would need to see your Kitchen plan and verify sizes before we can send you an official quote.
Dimensions as per your enquiry, exact sizes to be agreed on the site survey/template.
All pricing will be based on final measurements, as estimates do not always match actual measurements taken during the template phase.
You will be notified if there is a change prior to material being ordered.

Your Contact Information

We DO NOT share your information with the third party networks.
Tel: 02088 010780
Opening Hours
Mon - Fri: 8:30am - 5:00pm
Sat: 9:00am - 4:00pm
Sun: CLOSED
Material
 
Style
Straight
Worktops
 
Edge Finish
 
Round Corners
 
Splashbacks
 
Upstands
 
Windowsills
 
Sink
 
Drainer
 
Hob & Other Cutouts
 
Taps & Switches